my GSR Build [Archive]

SR20S13

07-07-2009, 01:45 PM

my build idea waiting till winter to fully do it (so i get the whole summer with my car haha)

B18C1 bottom end
82mm JDM ITR pistons
B16 Head with headwork done by bisimoto
Bisimoto Stage 3 camshafts
Bisimoto valvetrain
Running a Integra Full Radiator to keep everything as cool as possible because of 82mm bore want to keep the cylinder walls as cool as possiable

toddnos

07-07-2009, 06:34 PM

sounds like a great build.
what car will this be going into?

deddth

07-07-2009, 06:36 PM

welcome to hb! hope you enjoy this place.

i echo todd's questions.

SR20S13

07-07-2009, 07:21 PM

95 Civic HB its a DX with no options except well it had A/C but not anymore or at least has the electrical connectors as of right now its 2300lbs with a full tank of gas, full intioror and me in it

deddth

07-07-2009, 07:25 PM

pics of said ride?

SR20S13

07-07-2009, 07:39 PM

http://i42.photobucket.com/albums/e349/SR20S13/100_0819.jpg
http://i42.photobucket.com/albums/e349/SR20S13/100_0825.jpg
http://i42.photobucket.com/albums/e349/SR20S13/100_0834.jpg
http://i42.photobucket.com/albums/e349/SR20S13/100_0833.jpg

toddnos

07-07-2009, 07:41 PM

nice

deddth

07-07-2009, 09:16 PM

damn that looks like a fine hatch.

SR20S13

07-08-2009, 12:54 PM

the paint doesnt look that good up close haha

Natural Aspirations

07-08-2009, 01:45 PM

For the love of god get a cover on that timing belt.

boostdelinquent

07-08-2009, 05:06 PM

Nice looking ride. If you want to keep the temps as low as possible, you may also want to consider an oil cooler. You can get them for a little of nothing through FAL for a little of nothing.

deddth

07-08-2009, 05:22 PM

For the love of god get a cover on that timing belt.

whoa yes, do it.

jimmyb34

07-08-2009, 05:25 PM

white hatches with gsr's decimate all.... lol
nice ride

SR20S13

07-08-2009, 06:57 PM

yea i bought the car without a timing cover its kinda of ghetto, and its got a B16 head so its like a ghetto poor mans type r without type r pistons or cams haha and its got a B16 tranny but it ran a 14.7 at 92mph with terraible 2.3 60ft times so i think i could get at least down to a 14.5 or maybe lower if i get some better tires

BUT anyone got any GSR timing covers for sale????

Frogg

07-08-2009, 07:07 PM

lol, looks like my car before I painted it :P

sexy!

Natural Aspirations

07-08-2009, 07:22 PM

Lower covers are the same from LS/GSR/B20 you just need to match the cover to the oil pump. I believe OBD-0 and OBD-1 are the same where as the OBD-2 pump requires a different cover.

Natural Aspirations

07-08-2009, 07:24 PM

That is at least true for the lower cover on the block. I would imagine the uppers need to be GSR, I Got away with a GSR inner and b16 upper outer on my engine with a small gap at the mount.

SR20S13

07-26-2009, 05:53 PM

well its got a B16 head so wouldnt you need to use B16 ones or just get a GSR upper?

SR20S13

08-07-2009, 02:58 PM

ok so i've never rebuilt and motor how hard is it to do? or should i just have someone else do it because i want to get the entire bottom end balanced?

IntegraType-R

08-07-2009, 06:28 PM

unless you plan on taking the time to clearence it and what not..

dont do it

Send it to DFE enterprises or aka DonF and let him do it, for a good price, his turn around is pretty steller too.

SR20S13

08-08-2009, 02:19 PM

should i PM or does he have a email haha

SR20S13

08-08-2009, 02:57 PM

not to go off topic but Type-R what kind of intake are you running on your B20? or are you runnign a custom one?

IntegraType-R

08-08-2009, 10:09 PM

not to go off topic but Type-R what kind of intake are you running on your B20? or are you runnign a custom one?

my intake?

3'' intake arm from autozone, cost around 30 bucks.. its a true 3'' tho and thats what i wanted.. It also is moldable, e.I. you can add on to it, to make it longer..

It has a BPi vstack at the end with no filter..
i run a performerX manifold..just so everyone knows its a b20vtec, not just some silly b20.

SR20S13

08-27-2009, 01:58 PM

well i've made some small changes to my build idea

i'll be using endyn DHPS head with there full port job
and i'll be hopefully getting a B-series Bisimoto header

deddth

08-27-2009, 03:37 PM

can i get a pic of that intake arm, if you don't mind?

robert@bisimoto

08-27-2009, 06:15 PM

Nice thread.

SR20S13

08-28-2009, 09:51 AM

can i get a pic of that intake arm, if you don't mind?

heres a pic from one of his threads

http://i409.photobucket.com/albums/pp178/9400rpms/DSCN2976.jpg

Clean DC2

08-28-2009, 10:26 AM

I'm glad I can weld.

SR20S13

08-28-2009, 04:48 PM

I'm glad I can weld.

yea i wish i could well i wish i had a welder, i did some MIG welding in high school but wasnt the greatest at it haha

ooo yea and you have a pretty sweet intake haha

SR20S13

08-29-2009, 11:32 AM

Nice thread.

why because i'll be sending you guys more money then i'd like but can't stop myself

SR20S13

08-29-2009, 12:05 PM

oo yea and i'll also be getting a water/meth injection kit so i can well ltune easier because i might mill the head also so i can well get more compression

SR20S13

10-11-2009, 06:10 PM

WELL i'm now in the market for new cams or well i can be swayed sorry to bisimoto but some people there just can't convince me as to why i should get there cams, there doesnt seem to be a whole lot of people running them and shit there isnt even specs for there stage 2 cam on there website, nothing against the guy selling them but bisi was better anytime i talked to him he gave me good reasons why i should buy his cam

but rocket with this build any suggestions? haha